We EPG group one of the Biggest Chain and sprocket manufacturer in China. We provide you most type of industry chains, agricultural chains, conveyor chains and related sprockets etc……..
Contact us: Wechat/whatsapp/mobile: +86-13083988828
The We inspect every piece of bearing by ourselves before delivery.EPG is a leading supplier of high quality, cost-effective power transmission comp1nts. As our product lines continue to expand to meet our customer’s needs, our commitment to personalized customer service and on-time delivery remains second to n1.Rosta 06530007 T100BB13 idler sprocket for SE45/SE5010si1rs is manufactured to ANSI and ISO standards and is made from high-quality steel. It has 13 teeth and runs #100-3 triple roller chain & sprocket for size SE 45/ SE 5010si1rs. For more information or to get a quote please contact us and we will be happy to assist you!
06530007 T100BB13 Sprocket Dimensions
- Sprocket Size: T100BB13
- Article Number: 06530007
- Tooth Count: 13
- Works With Chain & Sprocket Size: 100-3
- Dimension (W): M20
- Dimension (L): 160mm
- Torque Hex Nut 0.5 d (Nm): 165
- Works With Tensi1r Type: SE-45 / SE-50
- Adjustable Range (R) with SE: 78-105 / 86-105
- W8: 5.20 kG
Mounting Instructions for Chain & Sprocket Drives
Standard Positioning: The ROSTA10sioning device should be placed on the slack side of the chain & sprocket drive, close by the smaller sprocket wheel in order to enlarge its contact-arc, therefore contact application from the outer side of drive. In mounted position, the10si1r-arm should stay close to parallel to the chain & sprocket run, in drain direction. By extremely long chain & sprocket drives it is recommendable to install several10si1rs or the type “Boomerang®” in order to enlarge the slack compensation. Reversible Chain & Sprocket Drive:By reversible chain & sprocket transmissions, it is recommendable to install a10si1r on each side of the chain & sprocket-strands. Due to the alternate occurring of the slack, both10si1rs should only be pre-tensi1d up to max. 20°, in order to retain a reset-path of 10°, when strains are changing from slack span on working span in reversible applications. Sprocket Teeth in Mesh:By the initial10sioning of the chain & sprocket, at least 3 teeth of the10si1r sprocket wheel should be in mesh with the rollers. The min. distance between the sprocket wheel of the10si1r to the next sprocket wheel in the chain & sprocket drive should be at least 4 chain & sprocket-pitches.Adjustment of Chain & Sprocket Track:The wheel of the sprocket wheelset is adjustable according to the position of the chain & sprocket drive track. The wheel is positi1d between 2 nuts on the threaded shaft. In changing the adjustment band “R”, the track of the10si1r wheel can be set according to the relevant strand course. After positioning the sprocket, re-tighten the 2 nuts on the side. The counter-nut “B” remains always tightened.